What type of filter do you have? If you have a sand filter and haven’t used any other products, FerriTabs work beautifully. However, because you’ve already added Jack’s Pink Stuff and ProTeam Metal Magic, the iron is likely tightly bound Read More …
Archives: Answers
Answer
what is least expensive way to repair a corner coping on an inground 1980 vinyl liner rectangle pool
That unfortunately is not an uncommon issue. If you can continue using it as it is, leaving the corners alone or sometimes even covering a hole at the top with duct tape to prevent people or things from getting behind Read More …
cloudy water
Are you able to get liquid chlorine where you live? Our go to formula for a pool your size is one or two cases of liquid chlorine (12.5%) if possible, and a gallon of muriatic acid. It seems to do Read More …
Can I go deeper than 5.5 feet on a replacement liner for a 24×16 above ground Doughboy pool?
There are several variables that would need to be addressed – what is your soil type, and is excavating the extra depth going to be easy? Where to put the excavated dirt, how to remove it safely from the pool Read More …
New Hayward Vari-flow XL valve. sand filters but not backwash
My first question would be is some water returning to the pool on backwash? If you’ve double checked the gaskets, and are sure you have mounted the Vari-Flow valve in the correct orientation that may not be an issue. Do Read More …
Coping repair/replacement for inground vinyl pool
Depending on how the pool was constructed it can be fairly simple to really complex. The coping is often the piece that sits on the top of the pool wall. It can be combined with the liner track, or it Read More …
Pentair Spa heater
How old is the heater? The blower/motor could be the issue as they can wear out, and begin to make noise. You may need to dig in deeper and see how the ventilation/blower is looking.
Propane heater suggestions for a 10,000 Gallon In Ground Pool
Any of those propane pool heaters should be a good choice. The propane company can likely do the gas connection for you. Depending on which heater you choose they should have specific specs and schematics for you to follow. Read More …
