Natural Chemistry’s Instant Conditioner is a winner!

Natural Chemistry Instant Pool Water Conditioner is an easy and effective way to protect your pool’s chlorine from UV damage, which can lead to unhealthy pool conditions and higher maintenance costs. Its liquid formula can be added directly to your pool water or through the skimmer to start working immediately, avoiding any need for messy dilutions or pre-dissolving. Best of all, Instant Pool Water Conditioner is made by Natural Chemistry, an industry innovator in pool and spa chemicals for 20 years, allowing you to buy with confidence.

  • Dissolves instantly
  • Pool friendly pH
  • Protects chlorine instantly
  • Will not harm any equipment or pool surfaces

Directions for use:

Instant Pool Water Conditioner 

One gallons of Instant Pool Water Conditioner will raise the conditioner/stabilizer level in 10,000 gallons (38,000L) of water by 32ppm. The recommended minimum conditioner/stabilizer level necessary to stabilize chlorine from sunlight loss is 30ppm.
Dosage for fresh water start-up (no conditioner/stabilizer present):
  1. Divide pool volume in gallons by 10,000 gallons to determine the number of gallons of Instant Pool Water Conditioner required
  2. SHAKE WELL!
  3. With circulation pump running, pour Instant Pool Water Conditioner into pool skimmer slowly OR pour directly into pool water, while walking around perimeter of the pool. Brush to speed absorption
  4. Rinse container with pool water and shake
  5. Pour remaining rinse solution into skimmer or pool
Maintenance Dosage:
  1. Measure CYA level in pool using cyanuric acid test or have it tested by a professional pool products supplier
  2. If CYA level is less than 30ppm, calculate gallons of Instant Pool Water Conditioner needed using the following formula:
          4oz added to 10,000 gallons = 1ppm increase of conditioner/stabilizer level

 

Pool Start Up Dose

To raise your Instant Pool Water Conditioner concentration 32 ppm, add 1 gallon per 10,000 gallons of pool water.
Maintenance Dose

To raise your Instant Pool Water Conditioner  concentration 1 ppm, add 4 ounces per 10,000 gallons of pool water.

 

Active Ingredients

Monosodium Cyanurate Monohydrate – 35%

Natural Chemistry Instant Pool Water Conditioner is the perfect way to shield its chlorine from UV damage, which can lead to unsafe pool conditions and higher costs.