Archives: Answers

It would be unwise to try to put something over EcoFinish- as it is a plastic coating that is mechanically and chemically bonded to the structure underneath. The correct way to proceed is to remove the ecoFinish, and tie into Read More …

Sometimes things happen. Its possible the HRV opened, we have seen it happen before. We haven’t seen them on a vinyl liner pool however, since groundwater would float a liner it’s not often used here. Maybe your area/ground conditions warrant Read More …

Does the pressure gauge reset to zero when the pump is off? If it does not, time to replace the gauge itself. Replacement Pressure Gauges

Some do tile borders, some don’t. If you have people coming to use the pool, point out the benches and they’ll likely avoid them. It’s not necessary to add the tile, more of a personal preference.

You can plug the pipe coming from the pool, or yes, you can remove the pipe and keep it plugged during the swap. If you have a multiport and you can put it on closed, that may also do the Read More …

An 18 Round pool would have a diameter of 18′ by 48″ tall.

If good adhesive was used it’s likely going to be very hard to remove. You can always get new vinyl and cut a larger patch to go over the old one if the concern is that it has lifted or Read More …

Could be an issue with the filter being dirty and allowing debris to pass through, a broken lateral in the filter, or a crack in a return line. Some more investigation would be in order, starting with a filter check/change Read More …